• Mazda2 Owners Manual
  • Mazda2 Service Manual

Chevrolet Spark manuals

Mazda CX-5 Owners Manual: HomeLink Wireless Control System

HomeLink and HomeLink house are registered trademarks of Johnson Controls.

The HomeLink system replaces up to 3 hand-held transmitters with a single builtin component in the auto-dimming mirror.

Pressing the HomeLink button on the auto-dimming mirror activates garage doors, gates and other devices surrounding your home.

home link mazda

Do not use the HomeLink system with any garage door opener that lacks the safety stop and reverse feature:

Using the HomeLink system with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards is dangerous. (This includes garage doors manufactured before April 1, 1982.)

Using these garage door openers can increase the risk of serious injury or death. For further information, contact HomeLink at 1-800-355-3515 or www.homelink.com or your Authorized Mazda Dealer.

Always check the areas surrounding garage doors and gates for people or obstructions before programming or during operation of the HomeLink system:

Programming or operating the HomeLink system without verifying the safety of areas surrounding garage doors and gates is dangerous and could result in an unexpected accident and serious injury if someone were to be hit.

The programming will not be erased even if the battery is disconnected.

It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radio-frequency signal.

• Disconnect the power to the device.

When programming a garage door opener or a gate, disconnect the power to these devices before performing programming, as continuous operation of the devices could damage the motor.

The HomeLink system provides 3 buttons which can be individually selected and programmed using the transmitters for current, on-market devices as follows:

Some gate operators and garage door openers may require you to replace this Programming Step 2 with procedures noted in the “Gate Operator/Canadian Programming” section.

3. After the HomeLink indicator light changes from a slow to a rapidly blinking light, release both the HomeLink and hand-held transmitter buttons.

If the HomeLink indicator light does not change to a rapidly blinking light, contact HomeLink at www.homelink.com or call 1- 800-355-3515 for assistance.

4. Firmly press and hold the programmed HomeLink button for five seconds, and then release it. Perform this operation two times to activate the door. If the door does not activate, press and hold the just-trained HomeLink button and observe the indicator light.

If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink button is pressed and released.

6. Firmly press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.)

There are 30 seconds in which to initiate step 7.

7. Return to the vehicle and firmly press, hold for two seconds and release the programmed HomeLink button. Repeat the “press/hold/release” sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process.

HomeLink should now activate your rolling code equipped device.

For questions or comments, please contact HomeLink at www.homelink.com or 1- 800-355-3515.

Canadian radio-frequency laws require transmitter signals to “time-out” (or quit) after several seconds of transmission ― which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner.

If you live in Canada or you are having difficulties programming a gate operator by using the “Programming” procedures (regardless of where you live), replace “Programming HomeLink” step 2 with the following:

If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent possible overheating.

Continue to press and hold the HomeLink button while you press and release― every two seconds (“cycle”) your handheld transmitter until the frequency signal has successfully been accepted by HomeLink. (The indicator light will flash slowly and then rapidly.) Proceed with “Programming” step 3 to complete.

Press the programmed HomeLink button to operate a programmed device. The code will continue being transmitted for a maximum of 20 seconds.

To program a device to HomeLink using a HomeLink button previously trained, follow these steps:

release the button.

2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink button, proceed with “Programming” - step 1.

Verify that the programming has been erased when you resell the vehicle.

Hazard Warning Flasher

Other materials:.

License Plate Light Removal/Installation 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Liftgate upper trim. b. Liftgate side trim. c. Liftgate lower trim. 3. Disconnect the connector. 4. While pressing the license plate light tab in the direction of arrow (1) shown in the figure, press the l ...

Engine Transaxle Integration Control [Fw6 A EL, Fw6 Ax EL] Outline The TCM controls engine output torque and reduces transaxle output shaft torque fluctuation during auto shifting, and reduces shock occurring from the vehicle during shifting. Construction Operation During auto shifting, the TCM sends the torque reduction reque ...

Ebd Control Outline EBD control uses the ABS system to control brake fluid pressure distribution to the rear wheels so that they do not lock-up prior to the front wheels during braking, thereby preventing the loss of handling stability. Feature EBD control has independent control syste ...

Three buttons welcoming you home.

HomeLink® is the world’s most widely trusted and used wireless control system. It conveniently and safely enables you to open and close your garage door and front gate, and to turn your home’s security system, outdoor lighting, interior appliances and electronics on and off. All from three buttons, smartly integrated into your automobile’s interior.

Ready to program your HomeLink?

Click here to get started.

  • Mazda2 Owners Manual
  • Mazda Service Manual

Mazda 6 manuals

Mazda 6 Owners Manual: Programming the HomeLink System

When programming a garage door opener or a gate, disconnect the power to these devices before performing programming. Continuous operation of the devices could damage the motor.

The HomeLink system provides 3 buttons which can be individually selected and programmed using the transmitters for current, on-market devices as follows:

1. Disconnect the power to the garage door opener or gate programmed to the hand-held transmitter.

2. Position the end of your hand-held transmitter 2.5—7.5 cm (1—3 inches) away from the HomeLink button you wish to program while keeping the indicator light in view.

Some gate operators and garage door openers may require you to replace this Programming Step 2 with procedures noted in the “Gate Operator/Canadian Programming” section.

4. After the HomeLink indicator light changes from a slow to a rapidly blinking light, release both the HomeLink and hand-held transmitter buttons.

for assistance.

5. Connect the power to the garage door opener or gate programmed to the hand-held transmitter.

6. Firmly press and hold the programmed HomeLink button for five seconds, and then release it. Perform this operation two times to activate the door or gate. If the door or gate does not activate, press and hold the just-trained HomeLink button and observe the indicator light.

If the indicator light stays on constantly, programming is complete and your device should activate when the HomeLink button is pressed and released.

to complete the programming of a rolling code equipped device (most commonly a garage door opener).

7. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn” or “smart” button. This can usually be found where the hanging antenna wire is attached to the motorhead unit.

8. Firmly press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.)

Complete the programming within 30 seconds.

” sequence a second time, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming process.

HomeLink should now activate your rolling code equipped device.

Auto-Dimming Mirror with Compass and HomeLink®

Make nighttime driving safer with Mazda's auto dimming mirror integrated with a digital compass and HomeLink ® system . This rear-view mirror automatically darkens when headlights are sensed, reducing stress to your eyes. HomeLink® allows for operation of multiple security aspects of your home program at the touch of a button. Integrated with a digital compass so you’ll be sure to never lose your way, even if you know how to find your way using the stars. 

sold out

  • Automatic dimming technology instantly detects and removes glares
  • Increases safe nighttime driving by eliminating driver's after-image blindspot from bright headlights 
  • Bright LED digital compass guidance 
  • Innovative HomeLink ® system wirelessly connects your vehicle to your home
  • Backlit buttons allow ease of controlling your garage, gate and security systems at your fingertips
  • Part #: 0000-8C-Z08C
Special Notes
  • Applicable models:
  • 2011, 2012, 2013, 2014
  • 2012, 2013, 2014, 2015, 2016
  • 2017 GX Models only
  • 2009, 2010, 2011, 2012, 2013 GS Models only

Recently viewed products

You may also like.

2004 to 2020 Mazda 3 Forum and Mazdaspeed 3 Forums banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • 2019+ Mazda 3 (Gen 4) News & Discussion
  • 2019+ Mazda 3 Appearance & Interior

Mazda 3 homelink

home link mazda

  • Add to quote

Hey guys, do u know if all mazda 3 trims have homelink or only premium? Thanks  

I purchased preferred trim and didn’t had auto dimmer with home link mirros.  

home link mazda

I have the premium trim and simply bought the auto dimming rear view mirror (sad Mazda felt they had to take it out as I had this pre-installed in my high end Mazda 3 2014). The dealership installed it free with the deal I negotiated. The same can be done for the home link mirror. See OEM site below for where you can make your purchase. https://www.mazdaswag.com/oem-parts...or-with-homelink-2019-mazda3-sdn-hb-bckav7210  

Yea i contacted Mazda Croatia they said no matter what trim you order there is no homelink, but i will ask if they can install it afterwards. Thanks  

Yea they would. It’s an accessary. But I purchased one on ebay from one of the Mazda dealer for $250.  

Yeah, it seems a bit cheese to take things away from new models present on previous package/models...it seemed like they tried to fix a bit in 2017 when they consolidated model/packages. Probably Mazda's not so subtle way of nickel and diming to keep the appearance of cost competitive, while giving the dealers a bit more incentive to upcharge since their margins are so small on new cars. When I see this from manufacturers, I always wonder where they "cut" on the things I don't see. I'm always glad to see the positive owner reviews, but there is nothing about the release of the 2019 (almost 2020) release that seems comfortably smooth from Mazda. Then they manufacture so many different models for global markets and being from the US, it seems like they still think we are not sophisticated enough for options they offer in other markets...or again, their effort keep pricing competitive...yet South Korea is riding their tail with these options.  

Yea well at least in US u get G25 ?  

home link mazda

Auto dimming w/ Homelink is standard on the premium model here in Canada. (I have it on mine.)  

home link mazda

In USA homelink/auto dim mirror is a dealer installed option. In my 3rd gen Mazda3 it was a standard offering in the Grand Touring trim.  

home link mazda

Attachments

  • BCKAV7210.pdf 1.4 MB Views: 1,401

I had mine installed at the time I purchased the car, it was part of the purchase price of the car so I have no idea what the labor charges are. I will say that this is the mirror that should have come standard on the Premium trim level. I really wanted an auto dimming mirror and the built-in garage door remote is worth the price.  

home link mazda

Emexrulsier said: My car came with the auto dimming mirror as standard just ofc no homelink buttons. Click to expand...
  • ?            
  • 624.3K posts
  • 128.3K members

Top Contributors this Month

home link mazda

Mazda 6 Forums banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • Technical / Performance / Model
  • Mazda 6 1st Generation (2002-2008)
  • Models / Trim
  • Add to quote

i tried to program my homelink buttons, but no matter what i do, it doesn't work! anyone has successful programmed them? my garage opener is using a switch and a battery, i guess it's just dividing the frequency to the proper range...is this not compatible to the homelink or wat...  

i tried to program my homelink buttons, but no matter what i do, it doesn't work! anyone has successful programmed them? my garage opener is using a switch and a battery, i guess it's just dividing the frequency to the proper range...is this not compatible to the homelink or wat... [/b] Click to expand...

home link mazda

I used use the homelink with my old condo garage door without any problem. I simply programmed my homelink (from the remote provided by strata) and used it. But I couldn't program it for my new condo garage door. It looks like new condo has different system (i.e. coding) and my homelink couldn't pick up the signal.  

yah..found out that it's previous programmed, no wonder the light doesn't blink at all and i almost ripped off the garage opener since i got so pissed...now it works so thaz kool...thx  

home link mazda

my house is relatively new (7 years) and we bought it new. my 6 came with a homelink mirror but i am unable to program it with my garage door opener. i looked at the garage door opener hanging from the ceiling in my garage and there is no "learn" button. any idea how i would go about programming it? i've tried searching for a how-to on here but no luck so far.  

home link mazda

hahaha...he must've been drunk off powerthirst for those who don't know: - Powerthirst Part 1 - Powerthirst Part 2  

  • ?            
  • 97.3K members

Top Contributors this Month

home link mazda

Mazda CX‌-30 Forum banner

  • Forum Listing
  • Marketplace
  • Advanced Search
  • Mazda CX‌-30 Forum
  • Mazda CX‌-30 General Discussion Forum

Homelink Mirror

home link mazda

  • Add to quote

I have a 2021 CX-30 Premium. Love it but it did not have the frameless Homelink mirror. Found the Auto-Dim/Homelink Frameless mirror on EBAY. Part number I ordered: BCKAV721A. Cost $249 My CX-30 had the autodim mirror already but no Homelink. When my new mirror arrived it came with instructions and a plug that could be hard-wired into a plug in the A-Pillar. Since I had the autodim already, I was hoping the current plug was also wired for the Homelink. Followed directions and removed the original mirror. Basically tells you to remove the plastic cover concealing the mirror base and sheltering the sensors. Easy just needed a plastic removal tool, wedged it into the longer part of the cover, slight twist and the cover popped off. Now I can see the mirror base. Instructions also tell you to remove the sensor display module, I did not remove it. You have the twist the mirror mount 60 degrees counterclockwise. Tried it with my hands but no luck, easily came off with a set of pliers. I unplugged the connector coming from the original mirror. I plugged my new mirror in and turned on the CX and my Homelink lite up. Turned car off and aligned mirror as directed and turned 60 degrees clockwise by hand and it clicked into place. It takes a firm grip after correct alignment but will turn and clip into place. Installed two plastic covers, easy and programmed my Homelink. If you already have autodim feature this is an easy install and well worth it in my opinion. If no autodim, you can still install the Homelink mirror but you have to tap into three wires in the A-Pillar. Good luck, ask if you have any questions.  

home link mazda

Weird! I was just reading about the Homelink in the online owner's manual an hour ago...  

home link mazda

MaxT said: If no autodim, you can still install the Homelink mirror but you have to tap into three wires in the A-Pillar. Good luck, ask if you have any questions. Click to expand...

I think they could. One is ground, one constant 12 volts and the other switched 12 volts. See attached instructions on where the wiring is located.  

Attachments

  • CX-30 Mirror Wiring.pdf 541.7 KB Views: 464

home link mazda

Thanks for the very helpful post. I need to remove the Homelink mirror cover to install a Dongar USB adapter, to power a dashcam. I have Tresalto panel removal tools, but I am worried about breaking the cover. I can get a tool in the joint below the lighted indicators. Is that the right place to start? I am afraid to apply force. Would you please tell me exactly where you inserted the removal tool and the steps to popping off the covers? Thanks. I appreciate any help you can provide.  

home link mazda

Did you sell your stock auto dimming mirror?  

  • ?            
  • 47.2K posts
  • 8.6K members

Top Contributors this Month

home link mazda

home link mazda

HomeLink Wireless Control System

Warning and cautions for using the homelink wireless control system.

Do not use the HomeLink system with any garage door opener that lacks the safety stop and reverse feature.

Using the HomeLink system with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards is dangerous. (This includes garage doors manufactured before April 1, 1982.)

Using these garage door openers can increase the risk of serious injury or death. For further information, contact HomeLink at www.homelink.com or www.youtube.com/HomeLinkGentex or an Authorized Mazda Dealer.

Always check the areas surrounding garage doors and gates for people or obstructions before programming or during operation of the HomeLink system.

Programming or operating the HomeLink system without verifying the safety of areas surrounding garage doors and gates is dangerous and could result in an unexpected accident and serious injury if someone were to be hit.

home link mazda

IMAGES

  1. How to Set Up Mazda Homelink

    home link mazda

  2. How Do I Use My HomeLink Mirror?

    home link mazda

  3. Pacific Mazda's Programming Your Homelink Garage door opener

    home link mazda

  4. HOW TO PROGRAM A MAZDA HOMELINK SYSTEM

    home link mazda

  5. Mazda Homelink Setup!

    home link mazda

  6. Plugged into the HomeLink mirror housing to get a clean dash cam

    home link mazda

VIDEO

  1. Video Guide

  2. Mazda MX-5 Miata

  3. HomeLink®

  4. HomeLink. Как настроить. Инструкция и обзор

  5. Mazda MX5 NC manifold and exhaust Tune 181hp #mazda

  6. MAZDA CONNECTED SERVICES​

COMMENTS

  1. Mazda Owners: Start Here

    You can also get detailed instructions for your specific vehicle by clicking your model name in the list below. For Mazda owners who are using a garage door opener by Genie, Sommer, or who have an older generation of HomeLink (in model years 2008 and earlier), select your training videos from the list beneath the main video. CX-3 (2015 - 2024)

  2. Welcome to Mazda

    Welcome to Mazda. Username. Password. Forgot your password? Excessive invalid attempts will disable your account for 60 minutes. Information displayed on this website is proprietary, confidential and is intended for the use of Mazda employees, dealers and vendors only. For assistance, call Mazda System Help Center (800) 421-6507. For Mazda ...

  3. How to Set Up Mazda Homelink

    Now you've gotten your new Mazda, it is time to set up the Homelink. Follow these easy steps you can program Homelink to open your garage door or security gate in no time! Get Directions. 980-944-8213. Mazda of South Charlotte; Sales: 980-944-8213; Service: 980-944-8179; Parts: 980-944-8214:

  4. Mazda CX-5 Owners Manual: HomeLink Wireless Control System

    Using these garage door openers can increase the risk of serious injury or death. For further information, contact HomeLink at 1-800-355-3515 or www.homelink.com or your Authorized Mazda Dealer. Always check the areas surrounding garage doors and gates for people or obstructions before programming or during operation of the HomeLink system:

  5. HomeLink Wireless Control System

    At the garage door opener receiver (motor-head unit) in the garage, locate the "learn" or "smart" button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. Firmly press and release the "learn" or "smart" button. (The name and color of the button may vary by manufacturer.)

  6. Homelink

    Control at your fingertips From Car-to-Home Automation to Complete Smart Home Control

  7. HomeLink

    HomeLink®. HomeLink® is the world's most widely trusted and used vehicle-based wireless control system. It conveniently and safely enables you to open and close your garage door and front gate, activate and deactivate your home's security system, and turn on or off your interior and exterior lighting, appliances and electronics.

  8. HomeLink Wireless Control System

    The HomeLink system replaces up to 3 hand-held transmitters with a single built-in component in the auto-dimming mirror. Pressing the HomeLink button on the auto-dimming mirror activates garage doors, gates and other devices surrounding your home.

  9. 2024 Mazda CX-5 Owner's Manual

    Disconnect the power to the garage door opener or gate programmed to the hand-held transmitter. Position the end of your hand-held transmitter 2.5―7.5 cm (1―3 inches) away from the HomeLink button you wish to program while keeping the indicator light in view. Simultaneously press and hold both the chosen HomeLink and hand-held transmitter ...

  10. What is HomeLink?

    Mazda HomeLink is available on almost all 2019 Mazda models and up. For more details on Mazda HomeLink systems, we encourage you to call 866-807-8084 today. Now that you know the definitive answer to the question "What is HomeLink" and more about it, we hope you'll enjoy the convenience it adds in your next new Mazda !

  11. Set Up Mazda Homelink Is Easy. Follow These Steps!

    In this video I'm a-gonna show you how to link any additional remote control devices you have in your Mazda vehicle for opening garage doors, security gates, or turning on lights in your home. The home link controls can be found on the rearview mirror, overhead console or the driver's side visor in most Mazdas. First step, please turn off the ...

  12. Mazda 6 Owners Manual: Programming the HomeLink System

    If the HomeLink indicator light does not change to a rapidly blinking light, contact HomeLink at www.homelink.com. or call 1-800-355-3515. for assistance. 5. Connect the power to the garage door opener or gate programmed to the hand-held transmitter. ... Mazda 6 Owners Manual: Front bumper removal/installation 1. Disconnect the negative battery ...

  13. Auto-Dimming Mirror with Compass and HomeLink®

    Make nighttime driving safer with Mazda's auto dimming mirror integrated with a digital compass and HomeLink® system. This rear-view mirror automatically darkens when headlights are sensed, reducing stress to your eyes. HomeLink® allows for operation of multiple security aspects of your home program at the touch of a b

  14. Homelink??????

    ES CX30. 27 posts · Joined 2020. #2 · Jun 1, 2021. Home link is not standard. Mazda dealer sells the mirror with homelink and dimming functions but be prepared for the cost. The premium has dimming so all you are adding is the homelink. Hundreds for a garage button is hard to justify.

  15. Mazda 3 homelink

    jadnice. 119 posts · Joined 2010. #3 · May 10, 2019. I have the premium trim and simply bought the auto dimming rear view mirror (sad Mazda felt they had to take it out as I had this pre-installed in my high end Mazda 3 2014). The dealership installed it free with the deal I negotiated. The same can be done for the home link mirror.

  16. 2023 Mazda CX-50 Owner's Manual

    HomeLink button. Hold the hand-held transmitter 2.5 to 7.5 cm (1 to 3 in) away from the HomeLink button you would like to program while keeping the indicator light in view. Depending on the hand-held transmitter, it may be easier to do the programming by holding it 15 to 20 cm (6 to 7.8 in) away from the HomeLink button.

  17. Homelink

    Mazda 6 1st Generation (2002-2008) Models / Trim

  18. Homelink Mirror

    Cost $249. My CX-30 had the autodim mirror already but no Homelink. When my new mirror arrived it came with instructions and a plug that could be hard-wired into a plug in the A-Pillar. Since I had the autodim already, I was hoping the current plug was also wired for the Homelink. Followed directions and removed the original mirror.

  19. Stevens Creek Mazda

    Stevens Creek Mazda is a new & used car dealership located in San Jose, CA. We sell & service vehicles in Santa Clara, Sunnyvale & Mountain View. Skip to main content; Skip to Action Bar; Sales: (408) 638-4462 . 4250 Stevens Creek Boulevard, San Jose, CA 95129 Home; Show New. Crossovers and SUVs. Mazda CX-30. Mazda CX-5.

  20. HomeLink Wireless Control System

    Do not use the HomeLink system with any garage door opener that lacks the safety stop and reverse feature. Using the HomeLink system with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards is dangerous. (This includes garage doors manufactured before April 1, 1982.)

  21. Fremont Mazda

    Saturday 10:00am- 8:00pm. Sunday 10:00am- 7:00pm. Find Your Vehicle. Visit us and test drive a new or used Mazda in Newark, CA. in the Bay Area, Fremont Mazda dealership always has variety selection CX-30, CX-50 CX-5, CX-9, MAZDA3, MIATA.

  22. Mazda Dealers in Santa Clara, California

    Tom Dolan's Reno Mazda. 9475 S Virginia St. Reno, NV 89511. More info See on map. Santa Maria Mazda. 1001 East Battles Road. Santa Maria, CA 93454. More info See on map. Each car dealership presented as an Accredited Dealer has pledged to use its best efforts towards detailed customer service in compliance with NewCars.com standards.

  23. Used Mazda Cars for Sale Near Santa Clara, CA

    Seating. Leather Seats (201) Memory Seat (126) Third Row Seating (33) Door count. 2 doors (17) 4 doors (237) Shop Mazda vehicles in Santa Clara, CA for sale at Cars.com. Research, compare, and ...